How to Keep Horse Stall Mats From Sliding Separating

To keep horse stall mats from sliding and separating using heavy-duty double-sided carpet tile tape, follow these steps:

1. Clean the Floor: Ensure the floor of the stall is clean, dry, and free of dust or debris. This will help the tape adhere better.
   
2. Prepare the Mats: Lay out the mats in the stall to ensure they fit properly and to determine where the tape needs to be applied.
   
3. Apply the Heavy Duty Double Sided Carpet Tile Tape:
   • Lift the mats one at a time and apply the heavy-duty double-sided carpet tile tape along the edges and in a grid pattern on the underside of the mats.
   • Make sure to apply tape around the perimeter and across the center of each mat. This will help keep the mats from shifting and separating.
     
4. Position the Mats: Carefully place the mats back into position, pressing them firmly to ensure good contact with the tape.
   
5. Check the Alignment: Make sure the mats are aligned properly and adjust if necessary. Press down firmly on all areas of the mats to secure the tape.
   
6. Roll or Walk on the Mats: Use a roller or walk on the mats to apply even pressure, helping the tape to bond securely to both the mats and the floor.

Additional Tips:

• Overlap the Tape: When placing mats next to each other, you can apply the tape so it slightly overlaps the edges of adjacent mats. This can help keep the mats together.
  
• Heavy-Duty Tape: Ensure you are using a high-quality, heavy-duty double-sided tape specifically designed for flooring or industrial use.
  
• Regular Maintenance: Periodically check the mats to ensure they remain secure and reapply tape as needed if you notice any movement.

Using these steps, you should be able to keep your horse stall mats securely in place with double-sided carpet tile tape.