Make sure the surface you are installing on is clean and dry before applying the double sided carpet tape. Otherwise there is risk of the tape not working nearly as well.
Easy to install for your "do it yourself" DIY project. No glue, no nails, no mess.
Measure the area carefully to ensure you have enough tape to cover the entire area. For example one 2 IN x 90 FT roll will cover approximately 170 square feet.
For door mats place the tape under the mat around the perimeter then peel off the paper layer and place on the ground and step to pressure on the floor to keep in place.
Use double-sided carpet tape to secure carpets and rugs to each other by taping them together underneath.
Use carpet tape to install vinyl or rubber stair treads.
Great for rubber moulding or wood trim repair
Trim any excess tape or carpet to ensure a neat and tidy appearance.
Use a utility knife to trim the edges of the carpet or rug.
Avoid placing carpet tape on top of existing adhesive residue.
Do not apply carpet tape to surfaces that are not completely dry.
Use a heavy object, such as a book, to apply pressure to the tape for a few minutes after application.
Test the tape on a small, inconspicuous area before using it on the entire carpet or rug.
Make sure the carpet or rug is completely flat before applying the tape.
It's recommended that you store the carpet tile tape in your home so it will be ready to use for your future project.
Apply the tape in straight lines to ensure a neat and tidy appearance.
Apply the tape along the edges of the carpet or rug from corner to corner to prevent it from moving or sliding at all.
Use carpet tape for your next flooring project and have secure non-moving floors for a long time.
It is recommended that a sharp utility knife is used to cut the heavy duty carpet tape and not scissors because the tape can stick to the scissors when cutting.
Use carpet tape to secure non-slip carpet on your steps.
Do not use carpet tape on painted surfaces, as it may cause damage upon removal.
Use a hair dryer to soften the tape adhesive when removing it from surfaces. This helps a lot especially with used with carpet to carpet.
Store carpet tape in a cool, dry place to prevent it from drying out and lasting a long time.
