How To Install Carpet Tiles Without Adhering To Your Floor

 

1. Roll out Carpet Tile Tape with paper side down

2. Use a utility knife to cut several 6 inch strips.

3. Layout your tiles completely in your space.

4. Each 6 inch strip goes under the corners of 4 touching tiles with adhesive side up.

5. Leave paper side on so the tiles "float" over the floor.

6. Peel up one carpet tile corner and place one 6 inch strip on a 4th of the tape.

7. Lift up second tile next to it and place that corner on adhesive side of tape and press both corners down to the floor.

8. Lift the last two tile corners up and press the tape down under the corners then press the corners down.

9. Leave paper side on and "float" tiles over the floor