-
Pressure Sensitive Adhesive Infinity 2 - Carpet Tile Glue
Regular price $85.00Regular price
"As a professional flooring installer, I need a tape that holds instantly but remains residue-free. It allows me to replace a damaged tile years later without damaging the subfloor or scraping glue. All Flooring Now carpet tile tape is the only tape I trust on my client's floors."
- Dan H., Professional Flooring Installer
Commercial strength hold that removes completely clean in one strip without residue - protecting your floors and eliminating cleanup time.
One roll can be used for multiple carpet tile areas and rugs, reducing trips to the store and cutting overall project costs.
Safe for use in homes, schools, and nurseries. No toxic fumes or ventilation concerns. Safe for immediate use after install.
One solution for your entire property. Works safely on hardwood, vinyl, laminate, concrete, carpet, and marble.
Reliable hold in heated sunrooms, cold garages, and humid basements where standard adhesives typically fail.
No glue, no mess, and no professional help required. Easy to apply for a perfect, gap-free installation in minutes.
- Data published by Journal of Injury and Violence Research (NEISS)
POPULAR USE CASES:
Install carpet tiles or rugs over existing floor while preserving the original surface. One-peel removal ensures no residue—perfect for full deposit returns.
Prevent rugs from sliding and corners from curling in hallways. Our adhesive is non-toxic and low-VOC to keep your family safe.
Built to withstand temperatures from -4°F to 176°F. The fiber-mesh prevents stretching and ensures a durable bond on concrete.
Replace damaged tiles in seconds. The tape removes cleanly even years later, avoiding labor-intensive adhesive scrapers.
Frequently Asked Question (FAQ's)
Will carpet tile tape leave residue on hardwood?
No, it will not leave residue on your hardwood floor when removed. The easiest way to remove carpet tile tape is using using your finger to roll it onto itself and then peel off in one strip. You can also use a hair dryer to loosen the tape from the floor then easily peel off in one strip without leaving any residue.
How many square feet of carpet tile will one roll of carpet tile tape install
A 2 in x 90 ft roll (2 in x 30 yd) will cover approximately 220 square feet. Coverage may vary slightly depending on installation pattern and surface type.
Can carpet tile tape be used on other materials other than carpet tiles?
Yes. You can use this tape to install and secure rugs, vinyl, laminate, wood, carpet, rubber, artificial grass, athletic sports turf, parquet, chair cushions and exercise mats.
What type of surfaces does carpet tile tape stick to?
Adheres to carpet tiles, rolled carpet, wood, tile, laminate, concrete, artificial grass, marble, vinyl planks, sheet vinyl, rubber leather, stone, glass, wool & fabric.
What is carpet tile tape made of?
Carpet tile tape is made with premium silicone and acrylic adhesive that is VOC Free and very low odor.
How long will carpet tile tape last?
The longevity depends on several factors, including the surface type, foot traffic and environmental conditions.
Indoor Use: On a clean, dry surface with moderate foot traffic, it can last 15+ years without losing adhesion.
High-Traffic Areas: In busy commercial spaces, it can last 10+ years.
Extreme Conditions: High humidity, temperature fluctuations, or exposure to lots of moisture may reduce its lifespan.
For best results, ensure the surface is clean, dust-free, and dry before application.
Is All Flooring Now carpet tile tape safe for adults, kids and pets?
Yes, Carpet tile tape is safe for family and pets. It's made with premium silicone and acrylic adhesive that is low VOC and low odor.
Can I use a commercial vacuum to clean my carpet tiles after installing with carpet tile tape?
Yes. The carpet tile tape is extremely strong and durable and will keep your flooring down on the floor. Also, great for robot vacuums.
Will carpet tile tape work well in below freezing areas?
Yes. This will hold up well in temperatures between -4° F to 176° F (-40°C to 80°C).
How do I clean the floor before installing carpet tile tape?
If your surface has glue on it remove the glue with adhesive remover. Also, remove any dirt, dust or water before adhering the carpet tile tape.
How thin is carpet tile tape?
Very thin (only .011 in / .28mm). You won't notice hardly any height difference in your installed material.
Will carpet tile tape work on textured rough uneven surfaces?
Yes. This will hold up well on rough surfaces.
Will all flooring now carpet tile tape damage my hardwood floor?
No, carpet tile tape will not damage your hardwood floor. If you want to take extra precaution you can use a hairdryer over the tape which will soften and release easily and will not damage or leave any residue on your floor.
Can the carpet tile tape be torn by hand?
Yes, but it's much easier to use a utility knife to cut the tape.
Can I remove and re-use carpet tile tape later?
It is recommended that a new piece of tape replace the removed piece so the adhesion is not compromised.
Can I use carpet tile tape on a heated floor?
No, it is not recommended that carpet tile tape be used on a heated floor or near a heat vent because the material will melt.
Is All Flooring Now carpet tile tape low VOC & Low Odor?
Yes, All Flooring Now carpet tile tape is low VOC and very low odor.
Should I use 2-inch wide carpet tile tape or 4-inch wide carpet tape?
The 2-inch width is designed for the grid installation methods for carpet tiles and also is a great choice for area rugs. The 4-inch width is for corner installation or seam installation methods and provides stronger overall hold because it adheres material to a greater floor area. Choose based on your installation technique.
Can I use scissors to cut All Flooring Now carpet tile tape?
The industrial-strength adhesive won't cut well with standard scissors. Always use a utility knife, box cutter or very sharp scissors for clean cuts.
Can I use carpet tile tape in my basement or outdoor patio?
Yes. The tape is rated for both indoor and outdoor use with a temperature tolerance from -4°F to 176°F. The reinforced fiber-mesh design maintains extreme adhesive strength even in humid basements or outdoor conditions.
Can I use carpet tile tape on stucco?
No, it is not recommended to use carpet tile tape on stucco.
Can I use carpet tile tape on drywall?
No, it is not recommended to use carpet tile tape on drywall.
Can I use carpet tile tape on cement?
Yes, carpet tile tape works well on cement.
Can I use carpet tile tape on brick?
Yes, carpet tile tape works well on brick.
Can I use carpet tile tape on rubber?
Yes, carpet tile tape works well on rubber.
Can I use carpet tile tape on Trex composite decking?
Yes, carpet tile tape works well on Trex composite decks.
Contact information for All Flooring Now Carpet Tile Tape?
Email: Contact@AllFlooringNow.com | Phone: 248.667.8259
💡 Why Choose Carpet Tile Tape?
🏠 Easy, Clean, and Damage-Free
- ✅ Installs in minutes — no glue, no nails, no mess
- ✅ Peels off easily without leaving residue
- ✅ Safe for all floors — hardwood, vinyl, concrete, laminate, and more
- ✅ No drying time — ready to use as soon as you are
💪 Built to Last
- ✅ Extreme strength adhesive that holds firm
- ✅ Moisture-resistant & weatherproof for indoor or outdoor use
- ✅ Commercial-grade durability — handles heavy foot traffic
- ✅ Cut to any size for custom installs
💯 Smart & Versatile
- ✅ Works on any carpet tile backing
- ✅ Perfect for residential or commercial spaces
- ✅ Cost-effective alternative to glue or underlayment
Our reinforced web mesh technology allows for a complete, one-peel removal without leaving a trace. Whether it's hardwood, vinyl, or laminate, you can install with confidence knowing your subfloor (and your security deposit) is 100% safe.
With over 40,000 injuries reported annually due to unsecured rugs, our industrial-strength grip is a household essential. It keeps corners flat and rugs firmly in place using a non-toxic, low-odor adhesive that's safe for kids and pets.
Basements are notoriously humid, but our tape is built to thrive. Rated for temperatures from -4°F to 176°F, the fiber-mesh design prevents the tape from stretching or failing in damp conditions, ensuring your DIY floor stays gap-free.
Pros choose us because we save them time. When a single carpet tile gets damaged, you can replace it in seconds. No scraping old glue, no messy chemicals, just a clean peel and a fresh stick, even years after the initial install.
- Choosing a selection results in a full page refresh.
- Opens in a new window.